|
|
||
|
Finished Photos Before & After
Shop & Tools
Radio
Engine
|
Crankcase breather and filler cap after removing (2) 1/4-20x5/8 bolts (2) lock washers |
|
| Oil filler hose and dip stick after removing | ||
| Oil filler hose and dip stick mounting hardware before removing | ||
|
Oil filler hose and dip stick mounting hardware after removing. (5) 1/4-28x3/4" bolts (5) flat washers (5) lock washers (5) 1/4-28 nuts |
||
| Lower thermostat housing before removing noting the location of the temperature gauge insert. | ||
|
Lower thermostat housing after removing (2) 3/8-16x1 bolt (2) lock washers |
||
| Water pump and main hub before removing | ||