Finished Photos
Before & After
Existing Truck
Shop & Tools
Running Boards
Truck Bed
License Plate
Rear Shocks
Rear Brakes
Electrical Wiring
Gas Tank
Bench Seat
Glove Box
Radio
Dash
Heater
Gauges & Switches
Windshield Wipers
Cab Vents
Grill
Radiator
Hood
Headlights
Front Fenders
Doors
This will need to be installed with the window channel off and before sliding the window in. Something I had to learn after pulling the window back out and unscrewing the window channel.
1) Paint, clear coat and polish door.
2) Glue on and cut to length, weather seal.
3) Install window channel, drill and tap screw holes, remove and cut to length. Place channel to the side out of the way.
4) Slide into place outer rubber weather seal and cut to length.
5) Bolt on door hinges to cab, slide door into place, adjust and bolt on securely.
6) Install window regulator with slide.
7) Install and secure door latch followed by inside door control.
8) Slide in new window with finished window frame and secure into place .
9) Slide in felt window channel and screw into place.
Note: The order you choice is up to you. This is my plan of attack based on what I learned from the first door.