|
|
||
|
Progressive Photos
Radio
Cab
|
||
|
|
Test fit. | |
|
|
Test fit shows bit gab at the joints... Paining on welding some scrap behind the joint, adjusting the cowl to final position and doing some filler welds... possibly... Might change my mind once I know more. | |
|
|
Gap between door frame and cowl. Cowl will need to be reshaped before welding into place. | |
|
|
Crown on cowl at pillar (door and windshield frame) flat and will need to be worked some before final fitting. | |
|
|
Same on the right side with the fitting and reworking that will need to be addressed. | |
|
|
Same on the right side with the fitting and reworking that will need to be addressed. | |
|
|
Right side of cowl setting a bit low. | |
